How To Safely Install A Hard Disk In Computer Desktop?
Introduction
At any time, you might notice that your computer is full of data or the inability to run applications. In such a situation, the best thing to purchasing a new internal hard drive.
These components expand the storage capacity of a computer without modifying the existing structure.
What Are The Internal Hard Drives Where They Are Located?
Installation of hard drives is easy, and one can do it on his own with the help of the right tools.
The present state hard drives use a data interface called SATA III, which has the potential of reaching a transfer speed of 6Gbps. In simple words, a theoretical limit of 700 MB/s of data flow.
Usually, they come in different sizes and capacities, depending on the equipment we plan to install. Some of the popular hard drives use magnetic plates to store information.
The disk is typically 3.5-inches that can currently have 1 to 2 TB of storage capacity. When it comes to the internal hard drives of laptops, they are usually smaller in size and remain at 25-inches.
Moreover, they are the same ones that are usually used to make external hard drives, which are experiencing success nowadays. Their capacity is usually similar to that of a large external disk.
The price is obviously higher than these models. Finally, we have some recent models of hard drives, such as SSD or M.2. These are larger than pen drives and don’t use mechanical disks but flash memory.
Interestingly, they are much faster than mechanical disks and are smaller in size with a low capacity, much less than mechanical disks. In terms of price, they are quite expensive.
You will be surprised to know that SSDs can be used in laptops and desktops due to their size and work with a SATA connector. On the other hand, M.2 disks are usually used in new generation laptops or ultrabooks.
Furthermore, they have hybrid hard drives in the same body that includes an SSD card hard disk and a mechanical hard disk with the potential to use the SSD disk at a place to dump the main data load.
Lastly, super-computers have a high-end hard disk and high-end graphic cards.
Also Read: SSD vs HDD
Install An Internal Hard Drive
First of all,you need the right tools: screwdriver, SATA cable, and power cords in the computer source.
Besides this, you must know that the process needs a lot of attention to all the steps and with special care. Handle the fragile pieces safely because the electricity static can blow it.
Installing Hard Disk In Desktop Computer
After removing the top of the tower, you need to locate the hard drive bays that are usually located in the lower front part, below the DVD player.
You can use screws to fix the disk and individual plates so that the hard drive fix perfectly in the bay.
After fixing the hard drive in the bay, you need to place the two cables:
Look for the SATA power connector in the computer’s power supply and connect it, which is the lowest and goes from the hard disk to the motherboard.
If the hard disk that you are installing is the only thing for storage in your computer, then it is important to connect the SATA data cable to the SATA 1 connector of the motherboard.
If the hard disk that you are installing belongs to M.2 model, then you need to find another slot in your motherboard.
You must know that PCI Express adapters and SATA adapters, which can be used to install M.2 hard drives.
Install Hard Drive In A Laptop
Here, you need to get the right screwdriver to open the covers. Though the process is simple, you can use only one hard disk instead of several. This means that the situation is entirely different with laptops.
You will rarely see a laptop with many hard drive bays until it is in a very high range or has the potential to use different types of disks. You can begin the task, once the bay is open.
Just fit the disk in the right bay sockets and indicated connectors. You may require to fit a hard drive with a SATA connector.
Finally, you need to turn on the computer and begin with installing an operating system. You can also begin with formatting the hard drive from your usual operating system.
Furthermore, you will not require extra cables during the process. This is how you can install a hard disk and begin with storing more data.